ankitmcgill
Technical User
Hello all,
this is my first posting here and i am new to cisco and networking in general so here it goes ...
i am trying to enable mac address notification on a 2900xl switch using the command "snmp-server enable traps mac-notifiction" but i do not see the "mac-notification" option in the CLI.
all i see is
CORE_SWITCH(config)#snmp-server enable traps ?
c2900 Enable SNMP c2900 traps
cluster Enable Cluster traps
config Enable SNMP config traps
entity Enable SNMP entity traps
hsrp Enable SNMP HSRP traps
snmp Enable SNMP traps
vlan-membership Enable VLAN Membership traps
vtp Enable SNMP VTP traps
<cr>
this is what i get on show version
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 10-Jul-01 11:52 by devgoyal
Image text-base: 0x00003000, data-base: 0x00333CD8
ROM: Bootstrap program is C2900XL boot loader
CORE_SWITCH uptime is 1 hour, 24 minutes
System returned to ROM by power-on
System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin"
cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID FAB0409X1WS, with hardware revision 0x01
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
12 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:01:42
0:67:00
Motherboard assembly number: 73-3397-08
Power supply part number: 34-0834-01
Motherboard serial number: FAB040843G4
Power supply serial number: DAB05030HR8
Model revision number: A0
Motherboard revision number: C0
Model number: WS-C2912-XL-EN
System serial number: FAB0409X1WS
Configuration register is 0xF
any help would be much appreciated ...
thanks !
anit
this is my first posting here and i am new to cisco and networking in general so here it goes ...
i am trying to enable mac address notification on a 2900xl switch using the command "snmp-server enable traps mac-notifiction" but i do not see the "mac-notification" option in the CLI.
all i see is
CORE_SWITCH(config)#snmp-server enable traps ?
c2900 Enable SNMP c2900 traps
cluster Enable Cluster traps
config Enable SNMP config traps
entity Enable SNMP entity traps
hsrp Enable SNMP HSRP traps
snmp Enable SNMP traps
vlan-membership Enable VLAN Membership traps
vtp Enable SNMP VTP traps
<cr>
this is what i get on show version
Cisco Internetwork Operating System Software
IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 10-Jul-01 11:52 by devgoyal
Image text-base: 0x00003000, data-base: 0x00333CD8
ROM: Bootstrap program is C2900XL boot loader
CORE_SWITCH uptime is 1 hour, 24 minutes
System returned to ROM by power-on
System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin"
cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.
Processor board ID FAB0409X1WS, with hardware revision 0x01
Last reset from power-on
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
12 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:01:42
0:67:00Motherboard assembly number: 73-3397-08
Power supply part number: 34-0834-01
Motherboard serial number: FAB040843G4
Power supply serial number: DAB05030HR8
Model revision number: A0
Motherboard revision number: C0
Model number: WS-C2912-XL-EN
System serial number: FAB0409X1WS
Configuration register is 0xF
any help would be much appreciated ...
thanks !
anit