2811 with bri port-config for mgcp

[Dtravler]

We are trying to config an 2811 router with an VWIC 48-S/T. This is card with 4 BRI-ports. With this router we want to have an ISDN-gateway communicating with MGCP to the CallManager.

In all the config examples is the config 'voice-port' command. But in our IOS's we tryied 12.4(17) of 12.4(9T) for some reason we only have the 'voice' command and the 'voice-card' command. We tryied the IP VOICE and the SP SERVICES IOS versions.
What do we do wrong, or do I need other configure commands to make MGCP, CallManager en BRI's work together?

 

[Dtravler]

Problem was the ISDN-card is a data only card.

Please close or remove this topic.