2616 date and time is wrong 1

[thegnat]

I'm working on a 2616 phone. It has the date and time as April 16 8:05 am. All other phones on the switch are correct.

 

[moose4me]

If you havent't already:

1- disconnect phone from wall jack and reconncect after a few minutes

2- disable and re-enable set

3- reprogram set

4- possible bad 2616

5- possible bad port on line card.

 

[thegnat]

It turns out that the time on the switch is off. All the times are incorrect on the phones. How do I set the time and date on the switch?

 

[cmawbey]

Hi time is set in LD 2
to test time at dot type TTAD (test time and date)
to change
at dot type STAD (set time and date)
Format is (day in month) (month) (year) (Hour) (Min) (sec)
so today and now is
ld2
.stad 25 6 2002 15 40 30

good luck Colin

 

[thegnat]

Thanks, that fixed it.

 

[cmawbey]

You are welcome Colin