sk8brder
Technical User
- May 21, 2008
- 1
Hello,
I am trying to setup a 2611 to provide remote access for a user using Cisco VPN client. The PC connects to the VPN
and receives an address from the IP local pool. The IP also appears as the default gateway for the VPN adapter.
While connected to VPN, ping and tracert from laptop to 10.0.0.n go nowhere. Also, route print on the laptop does
not include the "10.0.0.0 /24 LAN network.
Any help to get this working will be greatly appreciated. Attached is the router config along with some show commands
that were run while the VPN client was connected.
Router: 2611XM w/ 16F/64D and AIM-VPN/BPII
IOS: 12.3(26) c2600-advsecurityk9-mz.123-26.bin
VPN client is 5.0.03.0560
laptop: XP Pro SP3
I am trying to setup a 2611 to provide remote access for a user using Cisco VPN client. The PC connects to the VPN
and receives an address from the IP local pool. The IP also appears as the default gateway for the VPN adapter.
While connected to VPN, ping and tracert from laptop to 10.0.0.n go nowhere. Also, route print on the laptop does
not include the "10.0.0.0 /24 LAN network.
Any help to get this working will be greatly appreciated. Attached is the router config along with some show commands
that were run while the VPN client was connected.
Router: 2611XM w/ 16F/64D and AIM-VPN/BPII
IOS: 12.3(26) c2600-advsecurityk9-mz.123-26.bin
VPN client is 5.0.03.0560
laptop: XP Pro SP3