hi. i got a 2610 and a 3640 off of ebay for some lab work (i am wondering whether to learn CCNA) and i am having trouble doing a password reset.
following this guide:
i get this output
I get this with all the modules in (Serial, ADSL and FE)
and when i take all the modules out.
router has 32M of upper memory so i am guessing that i shouldnt have much of a problem with running out of memory?
following this guide:
i get this output
Code:
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory
rommon 1 > confreg 0x2142
You must reset or power cycle for new config to take effect
rommon 2 > reset
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xf7af48
Error : memory requirements exceed available memory
Memory required : 0x02714200
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x8000c150
PC = 0x0, Vector = 0x0, SP = 0x0
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xf7af48
Error : memory requirements exceed available memory
Memory required : 0x02714200
*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x8000c150
PC = 0x0, Vector = 0x0, SP = 0x0
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory
rommon 1 >
I get this with all the modules in (Serial, ADSL and FE)
and when i take all the modules out.
router has 32M of upper memory so i am guessing that i shouldnt have much of a problem with running out of memory?