Hi Everyone,
The 2620 powers on, but won;'t come to a prompt
This is a "play time" router... not production.
I am wondering about these two lines:
1. *Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
2. [OK]Invalid encrypted password: 10
any ideas what, how, or why?
Big Thanks...
Here is a copy of the output
>>>>>>>
*Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x403b9c
Self decompressing the image : ################################### ##############
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
cisco 2620 (MPC860) processor (revision 0x600) with 26624K/6144K bytes of memory
.
Processor board ID JAD053504EB (2361394632)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Building configuration...
[OK]Invalid encrypted password: 10
Press RETURN to get started!
Passed
00:00:09: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:09: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
ed state to up
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed sta
te to down
00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
ed state to down
*Mar 1 00:00:21: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:21: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
*Mar 1 00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Mar 1 00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/
0, changed state to up
*Mar 1 00:00:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/
0, changed state to down
*Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x403b9c
Self decompressing the image : ################################### ##############
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
cisco 2620 (MPC860) processor (revision 0x600) with 26624K/6144K bytes of memory
.
Processor board ID JAD053504EB (2361394632)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Building configuration...
[OK]Invalid encrypted password: 10
Press RETURN to get started!
>>>>>>>>>>
The 2620 powers on, but won;'t come to a prompt
This is a "play time" router... not production.
I am wondering about these two lines:
1. *Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
2. [OK]Invalid encrypted password: 10
any ideas what, how, or why?
Big Thanks...
Here is a copy of the output
>>>>>>>
*Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x403b9c
Self decompressing the image : ################################### ##############
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
cisco 2620 (MPC860) processor (revision 0x600) with 26624K/6144K bytes of memory
.
Processor board ID JAD053504EB (2361394632)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Building configuration...
[OK]Invalid encrypted password: 10
Press RETURN to get started!
Passed
00:00:09: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:09: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
ed state to up
00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed sta
te to down
00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
ed state to down
*Mar 1 00:00:21: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:21: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
*Mar 1 00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Mar 1 00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/
0, changed state to up
*Mar 1 00:00:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/
0, changed state to down
*Mar 1 00:02:51: %AAAA-3-DROPACCT: accounting record dropped: system-start
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x403b9c
Self decompressing the image : ################################### ##############
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################### ################################### ##########
################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:12 by phanguye
Image text-base: 0x80008088, data-base: 0x807AAF70
cisco 2620 (MPC860) processor (revision 0x600) with 26624K/6144K bytes of memory
.
Processor board ID JAD053504EB (2361394632)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Building configuration...
[OK]Invalid encrypted password: 10
Press RETURN to get started!
>>>>>>>>>>