2503 ISDN PPP on IOS11.0?

[alanphilips]

hi all,

after reading tons and tons of docs from cisco's
site, i still cannot manage to find out how
to configure the 2503 to dial to the internet
using the default ISDN port via PPP and
get a dynamic IP from the ISP.

my IOS is version 11.0, can this version
capable of dynamic ip via dial up?

would appreciate if someone can guide me.

your help is very much appreciated.

rgds

 

[wybnormal]

Without researching this one a bit, I would strongly suggest putting at the least, 11.3 on this router and then trying it. There were significant changes to the IOS from 11.0 to 11.3 in some subtle and not so subtle ways. Given you want dynamic IPs, I suspect this is your problem child.

Just my early am SWAG

Mike S
"Diplomacy; the art of saying 'nice doggie' till you can find a rock" Wynn Catlin

 

[cbum]

The Feature for Negotiating a Dynamic IP address is called
"Cisco Easy IP". This feature was first supported with IOS 11.3 and IOS 12.0, for more information look at White paper on Cisco IOS Easy IP.
"

http://www.cisco.com/warp/public/cc/pd/iosw/ioft/ionetn/tech/ezip1_wp.htm"

Also, Configuring easy ip

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/dial_c/dcprt11/dcezip.htm

Hope it helps.