We currently use an ISDN connection to access a remote site via the BRI0 interface on our Cisco 2503 router from our network. We would like to access a second remote site via the same ISDN.
My question is, can this be done without adding a second ISDN line. The information I've come across seems to suggest it can but every example I've seen has used the Serial interfaces to accomplish this as opposed to the BRI.
My question is, can this be done without adding a second ISDN line. The information I've come across seems to suggest it can but every example I've seen has used the Serial interfaces to accomplish this as opposed to the BRI.