2400 IPX ethernet config

[d2cslane2]

I have a need to tweak the IP connection of our 2400. Currently the connection is set to 10Mbps\Half, ADTM options
are 100Mbps-Half\Full or Auto negotiate. I vaguely remember the vendor who installed telling me never to change these settings. ? Are these settings not to be messed with or is my mind messing with me. The switch does support a few IP enabled Dterm's.

Thanks

 

[3racefan3]

When you say tweak do you mean speed or address? You can change the speed but the address means reprogramming all your IP phones as well obviously. We use 100 full and lock down the network ports at that speed usually.