Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2250
- Thread starter Alexisss
- Start date
Use LD 12 to add the attendant alternate number (AADN) to the console programming.
Then in LD 15 change the ATT data block to include a value for ATIM (Attendant Alternate Timer). Four rings is about 16-20 seconds.
If you need to print our the existing configuration (and I highly advise it), use LD 20 for the 2250 console and LD 21 for the ATT_DATA block.
Then in LD 15 change the ATT data block to include a value for ATIM (Attendant Alternate Timer). Four rings is about 16-20 seconds.
If you need to print our the existing configuration (and I highly advise it), use LD 20 for the 2250 console and LD 21 for the ATT_DATA block.
- Status
Similar threads
- Locked
- Question