Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2250 Console Key Information 1

Status
Not open for further replies.

NTOldTimer

Programmer
Jun 26, 2003
243
US
Does anyone know where keys 10-19 are located on a 2250 Console? Of course keys 0-9 are located in the "FK" keystrip column which is located on the right side of the console.
TN 006 0 00 02
TYPE 2250
CDEN 8D
CUST 0
SGRP 0
SETN 006 0 00 03
ANUM 01
ALPD NO
SSU
ICDR ICDD
ABAN ABDD
CPND CNDA
AADN
DNDI DNDA
LANG 00
KEY 00 BVR
KEY 01 BIN
KEY 02 MIK
KEY 03 MCK
KEY 04 ADL
KEY 05 ADL
KEY 06 ADL
KEY 07 EES
KEY 08 PRK
KEY 09 DCW
KEY 10
KEY 11
KEY 12
KEY 13
KEY 14
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 7 JUN 2005
 
They are the same keys as 0-9 but with using the shift key.

War Eagle!
Lions Baseball '09!
 
Is there a specific way to program them or something I'm missing on the console?

I've programmed keys in to 10-19 range, and when I try to use them with the shift key, nothing works.

 
No, there is no specific programming (ld 20). Pls post the TN again to see what you have programmed and what you expect the key to do

Chris
 
Here's the TN.

Currently. I move AWU to Key 12, however I've used every key from 10-19, with deferent features assigned.

When I go to teh console and 'shift'+key10 etc. nothing works as programmed. No response at all.

thanks

-----------


REQ: prt
TYPE: 2250
TN 2 0 0 4
DATE
PAGE

TN 002 0 00 04
TYPE 2250
CDEN 8D
CUST 0
SGRP 0
SETN 002 0 00 05
ANUM 01
IADN 2500
ALPD NO
SSU
ICDR ICDD
ABAN ABDD
CPND CNDA
AADN
DNDI DNDA
LANG 00
KEY 00 BVR
KEY 01 BKI
KEY 02 EES
KEY 03 DDL
KEY 04 PRK
KEY 05 DCW
KEY 06
KEY 07 MIK
KEY 08 MCK
KEY 09
KEY 10
KEY 11
KEY 12 AWU
KEY 13
KEY 14
KEY 15
KEY 16
KEY 17
KEY 18
KEY 19
DATE 8 SEP 2009
 
Have you ever got the AWU Key to work on KEY 0 thru 9 ?



[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
Maybe it is worth adding an ADL Key or a AUTO Key to KEYs 10 - 19 to see if you can get "some" key to work there.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
well I'll be damned.. whoda thunk?

I was using AWU all along - and it doesn't work on 10-19.

ADL works fine.

I'll have to test the keys I want to add on 10-19 to see what works and what doesn't.

As always, thanks Gene.

Shawn
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top