206ec port problem

[TheCardMan]

I have a R4 with a 206ec and the Line 1 port goes into a siezed mode after a week or so. I have to power down the system and it resets, but then it happens again in about a week. I have tried switching lines to see if it is the line causing the sieze but it wasn't. Could this be a bad module? Is this common?

 

[jahms]

Yes, and Yes. Replace the 206EC before it completely fails.
JDSlay

 

[tweege]

i agree, replace it. had one today do the same thing. line 2 would show in use on a particular phone, and that phone would not even function. pulled the card out and all was well. they had enough extra ports this card was not even needed anymore.

thanks, tim