Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2008 RDS Broker Configuration

Status
Not open for further replies.

spazman

Programmer
May 29, 2001
500
CA
I have followed the step-by-step to configure this on the servers in the farm. Setup DNS with Farm name. But all connections go from Gateway go direct to what appears to be a RRDNS server. No session on the broker server.

Setup
DMZ = 2 Gateway servers NLB NATed
these operate as they should
LAN
2 Broker Server NLB, with DNS name for team lbtsbr.domain.local
4 TS Session Host servers each with a RDP NIC and LAN access NIC, all the same apps, TS configured by GPO. When I check the Host COnfig, RS Connection Broker is setup. LAN NIC is set to higher priority in Network setup, so LAN access and RDP traffic are not contending.

DNS point to IP address of RDP NIC, as does farm name (TSF)

TS01 RDP NIC .121, LAN NIC .131

DNS TS01 .121 with reverse lookup
DNS TSF .121, .122, .123, .124

I have changed the Broker config to point to DNS name and the NLB IP address. Still no luck.

Any thoughts?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top