2000IVS station restrictions:

[boomer64]

What is the best and easiest way to restrict a station to station to station calling only. No incoming or ongoing calling only maybe 911.

Thanks
Ron

 

[OzzieGeorge]

Simplest way is put the stations in different tennants and restrict tennant to tennant dialing. However to get round the 911 requirement you may have to allow inter tennant connections, in which case you would give them different numbering plans and not include the other tennant's extension range!

See Cmds 1204 and 63 for tennanting and 29 and 20Y for numbering plan

 

[MercuryComm]

CMD 1201>ext#>66

 

[boomer64]

Thanks guys I'll have to wait until next week to try these suggestions. Thanks for responding I will post the results.

Ron

 

[boomer64]

Thanks guys, it turns out that their main problem was not being able to dial 911. I found in CM 8A050>1>0500 that trk grp 00 didn't exist in the PBX. I merely set to 0502 and voila it worked, I set the 2nd choice to 0503 this solved the 911 problem. The station to station restriction was alredy set to CM 1201>XXX>55 this too worked to restrict incoming, outgoing and transfered calls it also restricted those stations from dialing 911. So thanks for all your help and quick responses.

Ron