OK, 2000 school was 4 to 5 years ago, and I have done very little (just key assignments mostly) programming on our two 2000s. I mostly work with our 2400s, but don't need to do much on our phone systems (they never need it!! Good thing!!) Mostly support systems other than phones....
Here's my question (all on a 2000 IPS), I need to program an analog station as a hot line station. The target will be a virtual line appearance on a couple of D-Terms. I'm just thinking of this while at home, but not sure I have any info on what cmd used is to make a hot station and what cmd is used to specify the target station number. I'll check the books and my old notes in the morning, but if anyone knows the comands off the top of their head I would appreciate it, otherwise I'll hit my class notes and the books.... Thank you.
Here's my question (all on a 2000 IPS), I need to program an analog station as a hot line station. The target will be a virtual line appearance on a couple of D-Terms. I'm just thinking of this while at home, but not sure I have any info on what cmd used is to make a hot station and what cmd is used to specify the target station number. I'll check the books and my old notes in the morning, but if anyone knows the comands off the top of their head I would appreciate it, otherwise I'll hit my class notes and the books.... Thank you.
