2000 IPS attenuation

[AFRLPhoneGuy]

I have a 2000IPS on a T1 over fiber to my old 2400IMS. I am getting attenuation on all phones that are running off of the 2000. I hear that there is a setting that can be changed for the attenuation when it is being muxed. Any help would be appreciated

 

[neax]

Need more information: Is the connection too loud? Is there echo on the call connection?

 

[AFRLPhoneGuy]

The problem exhists on the digital phones, they recieve incomming traffic fine its just that outbound transmit volume is very low. I have gone through the programming manual and have looked into volume controll. this does not help. We are running Dterm E series phones with Push to talk handsets. I have investigated the possibility that the handsets are incompatible with the Dterm E phones. The handsets are said to be compatible. I have not noticed any "echo" durring connection. Thank you for looking into this

 

[grh959]

Look at PAD settings for your trunks. BE CAREFUL. look at the first page of settings for command 35.

Gary

http://www.gcti.com/contact.asp