I need to program up an analog station to an analog CO Trk for a telco provided ringdown. The analog station will drive a ring relay to trigger a digital voice announcer to a PA system. The call will be answered on a D-Term with the analog station being an apearance on the D-Term. I can do it on a 2400 with no problem, but the 2000, oh boy!!! It's probably just me, but the 2000 makes no sense to me!!! Any help would be appreciated!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2000 IPS analog for telco ringdown
- Thread starter ankledeep
- Start date
You must DIT the CO trunk to a Analog station.
3000>XXX>ZZ where XXX is the trunk number and ZZ is the route.
3002>XXX>04
3004>XXX>Sta # this would be the analog station. This for day mode
3003, and 3005 for night
3040, and 3042 for A mode
3041, and 3043 for B mode
Mextera
3000>XXX>ZZ where XXX is the trunk number and ZZ is the route.
3002>XXX>04
3004>XXX>Sta # this would be the analog station. This for day mode
3003, and 3005 for night
3040, and 3042 for A mode
3041, and 3043 for B mode
Mextera
- Status
Similar threads
- Locked
- Question
- Locked
- Question