Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

20-30 second delay when saving user info

Status
Not open for further replies.

jhtnadave

MIS
Jan 5, 2007
7
US
I am running a 412 using Phone Manager 5.2.57. The system is maxed out with 360 extensions and 500+ user entries. When I make any change on a user, I get an hourglass for 20-30 seconds after I click "OK" for the change. This was never an issue until I upgraded from 5.2.17 to 5.2.55. I was hoping the upgrade to .57 would help the issue and it did not.

Any thoughts?
 
I have noticed this on alot of 412's do you have any errors in the config? It is really slow because it verifies every change you make. Thats my guess anyway.
 
In 4.0 you can go into file->pref->validation and turn off some of the options.
 
If you are going to turn off the validate options make sure every time you save a cfg you hit the red tick at the top to scan the cfg for errors.

Turning off the validate options does speed the manager up somewhat, but the validation is there for a reason.



ACA - IP Office Implement
ACS - IP Office Implement
ACE - IP Office Implement
ACI - IP Office Implement
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top