2 PRIs on BCM 400 4.0

[Crowtalks]

I have a customer wanting to upgrade their BCM from analog trunks to two separate PRIs (for different departments). I haven't done any major programming on BCMs in three years so...

Can the BCM handle two PRIs?

If so, do I need two separate modules or is there a dual T1/PRI module for the BCM.

Thanks, Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2

 

[Firebird Scrambler]

Yes, in the UK we have BCM 400 systems with two PRI modules.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Crowtalks]

Thanks.

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2

 

[exsmogger]

AS long as you have 2 DTI modules installed you can configure them both for PRI.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952