2 pri configuration BCM 400

[jsaad]

What would be the recommended configuration on a BCM 400 with 2 pri trunks. Each PRI will be to a different carrier, both will provide DID and outbound service. I suppose my question pertains to clocking/master etc. Or am I making it too complicated?

 

[Firebird Scrambler]

Your main issue will be to set the dip switches on the module correctly, but the clocking shouldn't be a major problem.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[jsaad]

Thanks. I suppose I cannot use the same route code for each PRI circuit if I have two companies on the system?

 

[curlycord]

Depends why they have 2 carriers involved....why do they?

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[jsaad]

2 companies merge, 2 PRI circuits active under contract, plan to consolidate two systems into one.

 

[curlycord]

Then you can just have them both in BlocA and use the one Route/Dest in that case.



________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN