2 Norstar MICS with Multi-tech Voip gateways

[djs01]

Has anyone ever installed Multi-tech MVP2410 gateways on pri cards, with 2 norstar mics over ip?
Will this work with the 3rd pri card in the mics?
Do I need anything special (mcdn keycodes) to make this work?
I am assuming you can send calls across the network using target lines on the incoming pri?
Any comments would be appreciated.

Thanks,
Dave

 

[lugerlover]

if provider says the gateway will hand off a pri/T1 out of the cloud "network"and it has disconnect supervision than you need nothing more than your T1 card,services card and if a pri a pri enabler keycode...if you are going to share a vm system you will need mcdn key code...

A reminder that this is more than most techs would handle and you may want to get a company that has a long history and a good relationship with nortel