snakeblitsen
Programmer
Hi, I have a 2 lim system BC9. It has 1 gjul4 - gjul4 link. What is involved to add another link to give 60 channels. Can the gjul4 card be put in any spare slot. To configure is it only CNBOI command.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2 lims gjul4
- Thread starter snakeblitsen
- Start date
- Status
whosrdaddy
Vendor
GJLII:GSMULT=0-4,equ=1-1-00-00;
GJLII:GSMULT=0-5,equ=2-1-00-00;
--------------------------------------
What You See Is What You Get
GJLII:GSMULT=0-5,equ=2-1-00-00;
--------------------------------------
What You See Is What You Get
- Thread starter
- #5
snakeblitsen
Programmer
Hi, Thanks everybody. I've checked 'Alex, and it insinuates that the GJULs can be in any position so long as both Lims are the same eg 1-0-72 and 2-0-72 (which I hope to use as the REU boards are coming out when the new power supplies are installed.) Is this correct??
Cheers
Cheers
whosrdaddy
Vendor
snake, correct but, you must have 32 timeslots, so only x-x-y0 slots will do...
--------------------------------------
What You See Is What You Get
--------------------------------------
What You See Is What You Get
- Status
Similar threads
