2 jukebox devices on a Networker Server

[nandfred]

Hope somebody can help me here.
I'm trying to get a second SCSI jukebox up and running on a NT networker server. I have the licences in place, a 16 slot and a 9 slot licens, the SCSI ID is also good.
And both jukeboxes are installed on the networker server, but it seems like it won't enable the second jukebox.

 

[rgzimmer]

I'm sure you already did, but you installed the device drivers into the OS didn't you? You didn't mention that you had so I am just checking.

 

[nandfred]

Yes done that, the OS, sees both devices fine.

After some more testing, I've boiled it down to this:
The Jukebox device is a 10 slot, and the licens is for 9 slots only. It works fine if I try it with the temporary unlimited slot licens from legato. So I need a way to disable the 10th slot in the eyes of networker! But how?
I have set the availble slots attribute to 1-8 and cleaning slot to 9.

 

[nandfred]

Well I found the solution!
If the autochanger has more slots than your licens allows u to use, networker won't enable it, unless, you change the number of physical slots for the autochanger in the nsr.res config file, and restart the service.