Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2 Geforce4 MX 440's Via PCI In Windows NT 4 (SP6)

Status
Not open for further replies.

CaMiX

IS-IT--Management
May 24, 2005
3
US
I'm trying to setup 2 PCI video cards on an Windows NT 4 (SP6) machine. The cards I'm trying to use are Geforce4 440 MX cards, which are dual head video cards. I'm having a problem getting the OS/drivers to see more than 2 monitors on one video card. Since I have 2 of these PCI cards installed I need it to see 4 displays/monitors. I've tried assigned IRQ's in the Bios for each of the PCI cards. And that doesn't seem to work. I've also tried different drivers and that hasn't worked either. I don't know if this is just a driver issue or something with NT involving resources. I was able to accomplish this before with Appian Gemini Graphics cards (ATI chipset) but they have since been discontinued and I'm trying to figure out an alternate solution that won't hurt my wallet. Any help would be appreciated.
 
don't think nt4 supports dual monitor my friend.....earliest is win98.....nice try though....

SET CRTL ALT DEL = #728
-----------------------
greg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top