2 customers 2 smart jacks 1 bcm

[bcmfiftyfan]

Hello installing my first bcm450 to be shared by 2 companies. Customer 1 has pri from bellsouth/att. Customer 2 has pri from time warner telecom. New bcm450 equipped with 1 dsm32+, 1 dsm16+, 1 asm8+ and 2 dtms. Question 1: Should both dtms clock source be set to primary? Question 2: Any d-channel signaling issues to be aware of with 2 independent pris installed in 1 bcm? Thanks in advance.

 

[gberger]

I never had 2 PRI providers on l bcm but i would try with one set to primary and the second one on secondary and ask both telco's if they see any errors on their side.
Let us know the result.

 

[oldestgeek]

It doesn't matter the source of the PRI. Set one yo primary and the other to secondary and check for errors in the log. If you see errors, try switching them. If you still see errors, chances are the one with errors is on a bad T1 circuit.