2 CIL outputs

[bb34nne]

Is it possible to create 2 CIL outputs, one on RS232 and another on IP at the same time. I want to try another soft for gather information from MD, but 2 softs have to run parallel in the same time.

thanks for answers

bb34nne

 

[whosrdaddy]

Yes it's possible, but begin with the basics:

what version do you have?
NIU or SIU?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bb34nne]

VERSION=CXP1010101/4/TSWSP02/R3A

I got NIU2 board

DEVICE BOARD REVISION INFORMATION
DATE: 07MAR08 TIME: 13:30:13

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-60 NIU2 ROF 137 5396/2 R3A
CAA 1580021 R10A EXE
CAA 1580021 R9A OLD

bb34nne

 

[singhbrindisi]

Hi,

If possible put additional NIU in the system to gather billing records... One NIU can support both serial & Ip connection for billing.. You can have even similar priority on both outputs...

Look for CIL on V.24 & CIL on ethernet for the sequence of commands..

Cheers,


""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[bb34nne]

Does someone know any free prog for collecting CIL data? Over ethernet?

bb34nne

 

[Monrovia]

you can use hyperterminal for collecting CIL data. but thru ethernet, is it possible.. i dont know.