Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

192.168.110.10/Voicemail-cgi-bin/F983Wui.exe access error 1

Status
Not open for further replies.
UDR

UDR

Systems Engineer
Jun 20, 2018
4
AE
Hii,
This is ranjith from uae.i have Nortel Callpilot 150 mini.i cannot open callpilot MANAGER via Lan.its shows "192.168.110.10/Voicemail-cgi-bin/F983Wui.exe Message
is Access error and etc.
does Anyone knows please give me a solution
 
Sort by date Sort by votes
Likely the IP address has been changed. Connect a PC running Hyperterminal to the CallPilot serial port, 9600 baud, 8-N-1. Then reboot the CallPilot. As soon as the first screen appears press any key to stop the boot process. You will see the current IP address and have the option to modify the settings.

Brian Cox
Georgia Telephone
 
Upvote 0 Downvote
Message is Access error and etc. "

I think you need to be more precise and not so vague or provide a screenshot of what you see.
At first I had thought you meant cannot find page but now I wonder if it is returning an error to you "Access Error"
Access is a part of Callpilot.


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Upvote 0 Downvote
Hii,
This is ranjith from uae.i have Nortel Callpilot 150 mini.i cannot open callpilot MANAGER via Lan.its shows "192.168.110.10/Voicemail-cgi-bin/F983Wui.exe Message
is Access error and etc.
does Anyone knows please give me a solution


This Is the Screen Short


Capture_amkcib.jpg
 
Upvote 0 Downvote
-Have you done as exsmogger stated above yet?
Make sure the IP and the Subnet is correct when viewing hyper terminal.

-Did you change your PC/Laptop to 192.168.110.11 or higher?

-Is the Callpilot connected to a KSU that has compatible software?




________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Upvote 0 Downvote
IP Address And subnet is Correct
-i changed my PC IP Address as 192.168.110.11
- Yes its compatible.
Before Its was working good .One day power went suddenly after that only it happened
 
Upvote 0 Downvote
I connected with Hyper terminal and I saw some error Like below


CallPilot 150 Boot Loader V1.5.19
(C) 2001 Nortel Networks

--------------------------------------------------------------------------
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 192.168.110.10
LAN interface's subnet mask is 0xffffff00
HARDWARE PARAMETERS:
Serial channels will use a baud rate of 9600
This board's ethernet address is 0:1E:CA:F3:E8:77
CALLPILOT BOOTLOADER PARAMETERS:
Execution Mode: Load CallPilot
Source File System Parameters:
Device: ATA Disk
Source File List Name: filelst.lst
Destination File System Parameters:
Device: ATA Disk
File List Name: filelst.lst
Format Target Device: Y
Boot File Name: CallPilot.bin
After board is reset, start-up code will wait 2 seconds
--------------------------------------------------------------------------
To change any of this, press any key within 2 seconds


Automatic Update Mode Enabled!
To Change Update Mode to Manual, press any key within 10 seconds
Updating in Automatic Mode!

Initializing ATA Disk... Done.
Initializing PCMCIA Stack ...SSInit: CS_Sockets - 2,Num_PWindows - 8
Card services Init complete found 2 sockets.
Done.
Initializing PCMCIA ATA Disk Drives ...SanDisk SDP 5/3 0.6
AtaInit: completed
Done.
Detecting ATA Cards...
Device found in Slot A:
Model: SanDisk SDCFB-64
Serial: 101714A2105C3823
Rev.: HDX 2.25
Mounted 10.256
Loading 10.256/CallPilot.bin... Done.
Unmounting 10.256
Transferring control to the downloaded code

I-Cache ON, D-Cache ON
Downloaded OS and application executing from RAM
Memory Test Completed Successfully
Starting root(RAM)
Initializing D-channel driver
Initialized for 8 channels
Disk volume 3.0.0, initialized...
Initializing ATA Disk... Done.
Initializing PCMCIA Stack ...Card services Init complete found 2 sockets.
Done.
Initializing PCMCIA ATA Disk Drives ...SanDisk SDP 5/3 0.6
AtaInit: completed
Done.
Detecting ATA Cards... Card(s) detected
Formatting 7.0 as a pHILE+ volume
Verifying 7.0
Unable to calculate work area size, stat_vfs, rc=0x200a
Verifying of 7.0 failed
Cannot unmount volume. Error: 200A

********** W A R N I N G **********
*
* Formatting 7.0 as a pHILE+ volume due to
* file errors on Flash Card.
*
* - Unrecoverable error during volume verifying.
*
* Please, restore configuration data.
*
*******************************************

Error 2005, while formatting volume 7.0
Error 1009000c, while mounting volume 7.0
PPP: Using hardcoded ip address 192.168.0.2
PPP: Username is CallPilot
PPP: Password is administrator
PPP: Adding PPP NI...

Standard output device initialized...
7.1\safe not found
Pseudo device initialized...
error - make_dir 7.1\access2
TFTP device initialized...


Type "test" to stop auto boot


Login: Starting Access/2 and Voicemail
SysConfig file does not exist. Use default!!!
Opening DSP Msg logfile
DSP[0]: 1.50.51.A8 Oct 04, 2004
DSP[1]: 1.50.51.A8 Oct 04, 2004
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
DSP Abstraction Layer Binding to port 5001
DSP Abstraction Layer Accepting...
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
Language Debug: Reading '7.1\access2\runtime\alarm0.dat'.
Read language file '7.1\access2\runtime\alarm0.dat'.
Loaded 1 of 1 language file(s). Default language: 0 (hex).
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!

******************
Loaded 1 of 1 language file(s). Default language: 0 (hex).
* *
* ! R E A D Y ! *
* _ *
******************
Access up in 13 seconds
Starting voicemail
Country: NORTH AMERICA
Alternate QZ Mapping: 0
AMIS Address Start Key: #
Application SName: VM
Default Language {enum from country.c}: 0
Enable TT Gate: 0
Group List Lead Digit: 9
Key Language Toggle: 9
Key Operator Revert: 0
Login Mailbox Key: *
Local Number Length: 7
Maximum CLID display: 7
Maximum CLID entry: 16
Maximum Network DN Length: 16
Maximum Packet Network DN Length: 16
National Number Length: 10
SC Maximum Lines 10 20: 334
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
ACCESS ERROR, writeserialtosekur: cannot create file 7.0\access2\SEKUR!!!!
Voicemail CORE Ready...
 
Upvote 0 Downvote
I am guessing the software card (PCMCIA) is corrupt.

Suggest you purchase a 3.1 Callpilot software card.

With the old software still in the back slot put the new software in the front slot and power up the Callpilot (while connected to a KSU)
The new software will start to upgrade the old software.

You will see when it is complete via Hyperterminal
Power down, remove the new software from the front slot, power up and test Callpilot.

If it works then keep the software as a backup or use it to upgrade other Callpilot software's cards that might be out of date.
If it still does not work after the attempted upgrade then power down, remove old software and replace with new software (with front slot now being empty), power up and test.

Latest/last builds of 3.1 :
31.10.36.22 <----last Nortel branded software
31.10.37.22 <----same software but branded with Avaya labels


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

LidLock Technologies
  • Question
BCM50 R2 Voicemail service stopping repeatedly
Replies
5
Views
279
curlycord
curlycord
jwulf1092
  • Locked
  • Question
BCM50 access through BEM
Replies
2
Views
238
jwulf1092
jwulf1092
R
  • Locked
  • Question
Assistance with BCM450 Troubleshoot - Boot Loop - FPGA Configuration Error...
Replies
13
Views
692
rhol.bll
R
Watch Out.
  • Locked
  • Question
BCM 400 VM down Can access Element Manager.
Replies
13
Views
303
Smoki
Smoki
jsaad
  • Locked
  • Question
Voicemail to email feature
Replies
1
Views
73
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top