1841 Question

[jrmann1999]

I'm trying to wrap my head around something:

I have an 1841 with T1 WIC, Wireless 802.11g WIC, and two FA interfaces.

T1 WIC gets a serial IP from AT&T

I want to Bridge the wireless WIC and one of the FA interfaces(FA0/1).

FA 0/0 is connected to a DSL modem

I'm getting a /29 of public IP addresses from the T1 circuit. I need to NAT those IP addresses to hosts behind the bridged FA0/1 and Wireless WIC.

1: Is it possible to bridge a WIC and FA port? If so, is bridge-group 1 sufficient on both interfaces?
2: What interface(if any) do I need to assign the static IP addresses to be able to NAT them? Do I need to use a loopback for this?

Thanks.

 

[Alterac]

Its all possible.
Assign your Wan IP Address to the Serial0/0/0

Make a Nat pool with the external addresses the isp provides.

bridge-group 1 your radio to the fe0/0

That should be it.




----------------------------------
Bill

 

[jrmann1999]

Is there any way to use one of the IP addresses(that's not the Serial) as the source for crypto?