FriscoMoves
MIS
I have a DSL line with 13 static IP addresses. Everything was working fine with the 1760 router talking to my 3524 switch. I'm having trouble since I added a PIX 501 in between my 1760 router and 3524 switch. I think it may be an IP address problem.
Should my setup be like this:
1760 router:
Outside interface: 63.243.x.1 (public IP)
Inside interface: 63.243.x.2 (public IP)
PIX 501:
Outside interface: 63.243.x.3 (public IP)
Inside interface: 192.168.0.1 (private IP)
or should my setup be like this (current setup)
1760 router:
Outside interface: 63.243.x.1 (public IP)
Inside interface: 192.168.0.2 (private IP)
PIX 501:
Outside interface: 63.243.x.3 (public IP)
Inside interface: 192.168.0.1 (private IP)
Should my setup be like this:
1760 router:
Outside interface: 63.243.x.1 (public IP)
Inside interface: 63.243.x.2 (public IP)
PIX 501:
Outside interface: 63.243.x.3 (public IP)
Inside interface: 192.168.0.1 (private IP)
or should my setup be like this (current setup)
1760 router:
Outside interface: 63.243.x.1 (public IP)
Inside interface: 192.168.0.2 (private IP)
PIX 501:
Outside interface: 63.243.x.3 (public IP)
Inside interface: 192.168.0.1 (private IP)
