Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1721 Router timming
- Thread starter jprice
- Start date
- Thread starter
- #3
I think iproute meant, could you post your configs?
What do the serial interfaces show (interface and line protocol up or down)? One suggestion: if your T1 is not running through a public network, this means there is no source of timing for the CSU's/DSU's. Try setting up your CSU's/DSU's in a master/slave configuration, ie your master CSU provides clocking to the slave, and both CSU's then provide clocking to the routers.
What do the serial interfaces show (interface and line protocol up or down)? One suggestion: if your T1 is not running through a public network, this means there is no source of timing for the CSU's/DSU's. Try setting up your CSU's/DSU's in a master/slave configuration, ie your master CSU provides clocking to the slave, and both CSU's then provide clocking to the routers.
- Status