16ELCJ card

[Nick1442]

I am working on a 2400 IPX switch and can not assign stations to different module groups. I know that there is a specific rev. for the 16 ELCJ cards and I cannot remember this. I have 100 cards with various rev. ranging from 1A to 9A.

Can anyone tell me what rev. I would need in order to resolve this conflict? I also checked ASYD sys 321 to verify that the bit was 03.

 

[3racefan3]

The card should be a 16ELC-J with SP3514 or newer.

 

[Nick1442]

all the cards have either SP3752, 3935, 3797, or 3656, but what rev. is required? is it 8A or higher?