1608 - I & 1616 - I

[smithaura]

Hi

We recived the 1608-I phones ,is there any latest 16XX setings for the 16XX phones along with 46XX setings

we are having a problem with Redial , i have programmed the redial for List , when user press the redial Key it will only dial 5 digits not all digits & not inserting 9 ARS prefix

Thanks a Million

 

[capsit]

Hello.
I had the same error on 1603-I ip-phones.
After installing the latest firmware version 1.30 for h.323 phones error no longer appears.
Try it.

 

[noriknic]

############# ENHANCED LOCAL DIALING RULES ###############
##
## These settings affect certain dialing behaviors, such as
## dialing numbers from the incoming Call Log or from web pages
##
## Dialing Algorithm Status
## Controls whether algorithm defined by parameters in
## this section is used during certain dialing behaviors.
## 0 disables algorithm.
## 1 enables algorithm, but not for Contacts
## 2 enables algorithm, including Contacts (96xx SIP only)
## SET ENHDIALSTAT 1
##
## Country Code
## For United States the value is '1'
## SET PHNCC 1
##
## Internal extension number length
## If your extension is 12345, your dial plan length is 5.
## On 46xx phones, the maximum extension length is 10.
## On 96xx phones, the maximum extension length is 13.
## This value must match the extension length set on your
## call server.
## SET PHNDPLENGTH 5
##
## International access code
## For the United States, the value is 011.
## SET PHNIC 011
##
## Long distance access code
## SET PHNLD 1
##
## National telephone number Length
## For example, 800-555-1111 has a length of 10.
## SET PHNLDLENGTH 10
##
## Outside line access code
## The number you press to make an outside call.
SET PHNOL 9
##