1605 Nat setup

[12122053]

We have a couple of pbx boxes with hard coded C class ip addresses. We want to do NAT so they can translate to our 10.0.0.0 scheme. We are using a cisco 1605. The pbx are going to eth0 and our 10. net is plug into eth1. What is the proper setup, thanks.

 

[12122053]

More information
PBX ip's desire translation
192.1.1.1 = 10.40.1.1
192.1.1.2 = 10.40.1.2
192.1.1.3 = 10.40.1.3

Thanks

 

[12122053]

Anybody have any ideas how to setup NAT for this. I want to do a static translation from 192.1.1.1 to 10.40.1.1, please help, thanks.

 

[jeter]

ip nat inside source 192.1.1.1 10.40.1.1

your ethernet should have ip nat inside

your global side should have ip nat outside Jeter@LasVegas.com
J.Fisher CCNA

 

[12122053]

Hey jeter will this work even both 192 and 10 nets are both eternal. Thanks