Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
13.004.43:9670
- Thread starter bhoskins
- Start date
From SM: "the left jet stack heater is not heating at all, or is heating too slowly. Check that the printhead to drum gap is not too close [Note: this should not apply to the 850 as it is preadjusted -Steve]. Inspect printer wiring. Replace the printhead"
- Status
Similar threads
- Locked
- Question