11xx sets being killed by bcm? 1

[phoneguy610]

we are having an issue with one of our customers and i was wondering if anyone else has run into this

BCM450 5.0

Customer has about 75 11xx series phones

Every week about 3 or 4 of them die.

This has been going on for a while

we are going to patch it and probably bring it to 6.0 but was wondering if anyone else has run into this

ddcommllc.com
Avaya/Toshiba/Nortel

ACIS

 

[GordonKapesMZ4]

There has been a problem with these phones in the past running full gig on CS1000, but I didn't think that was possible on the BCM. It could be a faulty POE switch.....I'll try to find that other post about the 11xx phones dying on the CS1000.

Joseph Sus-Nortel Installer/Programmer

http://www.linkedin.com/pub/joe-sus/12/1a7/856

 

[phoneguy610]

i doubt it is the switch .. it is a nortel switch and there is actually 3 of them. The dead phones are coming from all 3.



ddcommllc.com
Avaya/Toshiba/Nortel

ACIS

 

[ucxguy]

Here is a notice from Avaya about high failure rate of the 1120E, 1140E, and 2007 phones after 4-5 years of use:

https://downloads.avaya.com/css/P8/documents/100142092

You can also find do-it-yourself instructions here:

http://www.bluemunkey.com/?p=47