1150E ACD on BCM

[pablo100]

Greetings all

Is it possible to run the Nortel iP 1150e call centre telephone on the BCM platform?

I currently have a BCM50 Rls3 and i am having no luck in bringing these phones into service. The telephone obtains its ip address via DHCP from the BCM ok ( i have proved this out by accessing the config menu on the phone and pinging the ip address from a computer on the subnet), but the phone goes no further, it appears to 'lock-up' on 'waiting for config data' I have tried several different 1150's with differing firmware variants, all to no avail.

Sirs/Madames, i await your enlightening responses.

Pablo100

 

[foneman1]

Is your BCM up to date on patches? The 1150 will work with bcm50 but not in BCM50 SRG.

 

[gwebster]

IP Phone 1150E is NOT SUPPORTED ON ANY VERSION OF BCM.

 

[foneman1]

Thanks gwebster. I think it only works with BCM50 SRG normal mode and not local mode. Thanks again.

 

[seryozha]

they only work on CS1000 Platform, unfortunately.

 

[gwebster]

..CS 1000 and CS 2100.

 

[pablo100]

thanks all, and thanks again for responding so swiftly and succinctly.