Hi, trying to convert a nortel 1140e from unistim to SIP it is currently running on unistim 0625C8Q. The following files are in the tftp folder, 1140e.cfg and the firmware im converting to. on boot it looks for system.prv 1140E.prv, 001ECAF1C7FE.prv and 1140e.cfg. I have all of these files except for the 001ECAF1C7FE.prv in the tftp folder also. after It reads all these files ok it says checking for updates and continues to boot but does not change the firmware. I tried to both upgrade the current unistim firmware to latest and convert to SIP also with none of them been a success.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
1140E Unistim to SIP
- Thread starter pabx1121
- Start date
Hey there,
Please see the following links:
Joseph Sus Jr. Nortel Enthusiast
Please see the following links:
Joseph Sus Jr. Nortel Enthusiast
- Thread starter
- #3
thanks Joe, had a look at these but as I say what it is doing is looking for various .prv files. it does read all files including the 1140e.cfg but does not write the firmware change to the phone, it just continues to boot and connect to the BCM50 as normal
- Status
Similar threads
- Question
- Locked
- Question