1140e sets keep trying to download new firmware

[ArrJay21]

When I reboot one of the sets, it continually tries to download firmware and just stays in a loop until I set the TFTP id to 0.0.0.0. Is it trying to pull this from the Signaling Server? Help!

 

[gwebster]

With CS 1000 4.5 or later, the IP Phone 1140E can pull it's firmware from the Signaling Server. With CS 1000 3.0/4.0, you need a TFTP server to provide firmware.

 

[ArrJay21]

I am running 4.5. Why does it keep trying?

 

[dlesap]

TFTP ip address is not required unless you wish to download from another server than the SigServ. If so, the firmware server address also have to be set up in the Node configuration