Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1140 IP set key programming

Status
Not open for further replies.

nconick

MIS
Sep 28, 2005
197
US
I have an 1140 I'm trying to add some lines too. First, I can't hit the "shift" key and get to the second "layer" of keys (6-11)? Secondly, I try and program a DN on key 6, but it gives me SCH0378 and SCH0360, telling me "DN already has max number (30) stations attached" and "Wrong number of input fields for prompt key". I do have an add on module with (14) hot dials and a DN on it. I have (6) DN's programmed on the first screen of the actual phone, which still is only (21)DN's total. Why can't I hit "shift" and get to the second screen, and why is it telling me I've reached my max DN's when I haven't reached 30 yet? Could it be the set has old firmware? Any help would be greatly appreciated, thank you!
 
What the SCH code is telling you is that the DN you are trying to put on the phone already appears on 30 stations which is the maximum.
 
Thank you. I just have to delete that DN off of the 2616 I'm replacing with the 1140. However, do you know why I wouldn't be able to "access" the second screen with buttons 6-11 on the 1140, or is this for the same reason? Thank you very much for your help!
 
Probably same reason; did you try to program anything else on one of those keys?
 
Just another DN, nothing other than that. Thanks again for your help, it's much appreciated!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top