Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1120e Sets Working and Displaying "Starting DHCP"

Status
Not open for further replies.

Leofsiege

Technical User
Dec 10, 2018
2
US
Good Morning All,

I have about a couple of dozen 1120e sets that are working just fine but are displaying the "Starting DHCP" message. Whenever you go off-hook, the message goes away for a about a minute, then comes back. If I power cycle the set, it goes away and comes back. These are sets that have been working just fine for over a year. I am not very good on this system and could use some help. Thanks.
 
I would swap the phone over with another working IP set that hasn't been failing to see if the problem stays with the phone. If it ddoesn't. then I would suggest that the IP Network is investigated as this could be the problem.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Tried one of those phones in a known working port (VLAN issue etc.), default phone make any difference? Guessing as don't remember ever seeing it
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top