Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1120 AOM

Status
Not open for further replies.

motox2

Programmer
Jun 21, 2007
426
0
0
GY
is there a procedure for provisioning a new AOM for an 1120 IP set? THX
 
I found this below

Product bulletin P-2006-0355-Global-Rev1 says:-

The 0624C39, 0625C39 and 0627C39 maintenance releases of firmware gives the ability for IP Phones 1120E, 1140E and 1150E respectively to support the Expansion Module.

Also, when configuring the ip set in LD 11, the KEM value needs to be set to 1 or 2 as required and add KEM3 to the CLS. Why KEM3 isn't explained in the NTPs and has anyone got further information on this?.



Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top