Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

10ps printer, PCL3GUI

Status
Not open for further replies.
rozek

rozek

Technical User
Jul 6, 2007
2
Hi,
I want to write a driver for HP 10PS printer. As far as I know this printer uses PCL3GUI, but there is nothing useful about it. I have searched everywhere in Internet, but did not found anything similar to PCL3GUI Technical Reference or at least "Command Set" list.
I know that PCL3GUI is similar to PCL3, but PCL3 doesn't work with this printer.
Does anyone know how to use this PCL3GUI or has any information about programming Hp 10ps printer.
 
Status
Not open for further replies.

Similar threads

sysmatics
  • Question
Initialize a printer after printing a page
Replies
2
Views
851
sysmatics
sysmatics
vgulielmus
  • Locked
  • Question
Shared printer connected via USB
Replies
4
Views
1K
vgulielmus
vgulielmus
S
  • Locked
  • Question
Sharp BP-50C55 printer User Authentication box
Replies
0
Views
412
SMS1295
S
R
  • Locked
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
463
DrB0b
DrB0b
ayzal
  • Locked
  • Question
How to dispose old printers?
Replies
0
Views
244
ayzal
ayzal

Part and Inventory Search

Sponsor

Back
Top