Anyone know how I may be able to clear this alarm,have changed the backup optical drive and disk.Able to write/ backup to optical drive ok no problem.
Anyone have any ideas.
Thanks
ADD INFO 1 and ADD INFO 2 in the alarm 108 are inmportant. Could you post the whole information you have in ALARM 108?
Could you do also a FISCP on the IODEV and post the result?
Here is the info you requested,thanks for your help.
CLASS:3
108 FILE SYSTEM ROUTINE TEST ERROR
DATE TIME ALP NOIF EQU BRDID INF1 INF2
03FEB06 10:27:00 4 1 001-0-60-00 69 3 2
<FISCP:IODEV=SAFETY-DSK;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 217 MBYTES
SUBFS: SAFETY-SF
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
NOT ACCEPTED
NODE NOT FOUND
Here is the analysis of INF informations :
INF1 = 3 mean Disk used for storing of a safety backup copy is not accessible.
INF2 = 2 mean SCSI position 2
Also FISCP indicated that the node is not found :
Either the disk is switched off, or the SCSI position on that disk is not 2, or the disk is dead.
I take your point,the alarms indicate disk/scsi cable or scsi drive failure but for some reason I am still able to write/backup to the disk.Plus I have already swapped out the drive and disk.Thanks for your help,I will let you if I find the problem.
I am also experiencing almost identical problem as shown by printouts below but when I check the file system it is okay. Can any knows which one is causing the problem? I tried replacing the NIU & the HDU7 but the alarm is still
there.
Rokane
DATE: 07FEB06 TIME: 08:29:20
CLASS: 3
106 FAULTY I/O BOARD OR CONNECTED I/O DEVICE
DATE TIME ALP NOIF EQU BRDID INF1 INF2
07FEB06 08:18:26 5 1 001-0-60-00 106 9 3
<FISCP:IODEV=SYSDISK1; FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 8063 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 23083 19200 /SYSN/USR1
SUBFS: SYSSUBFS12
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 60324 19200 /SYSN/USR1/SES/DR/REL1/S2
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 23214 19200 /SYSN/USR2
SUBFS: SYSSUBFS22
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 60324 19200 /SYSN/USR2/SES/DR/REL2/S2
END
Which revision is you NIU?
Have you tried FIFTI on the SUBFS: this command solve a lot of error, but in some cases, it cannot perfom the correction and you are obliged to format you partitions on that disk.
The NIU revision is R17A.I already did FIFTI & partitions formating but just the same the problem is still there. The
last thing I did was to do RFEXI during weekend & the problem dissapeared but the really reasons what caused it
still unknown to me.
Hmmmm, some problems could be related to NIP or FIP PU.
It could also be related to the NIF loaded into the NIU. I have problems at the moment with NIU in R13A when I simply cannot have access to the system via V24.
Exactly what I am expecting. I will move my NIU into the latest FW available and see if it improve the situation; I suggest you to do the same. The most strange thing is that my NIU FW R13A does not create problems on BC12, while it does on BC11
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.