1000M 4.5w with Cisco Call + QSIQ Outdial to Cell showing just 907...

[esoare]

So here is how I thought this would work.

QSIQ PRI TIE trunks Between 1000M and Cisco CallManager.

Built DSC 734 to Route on 1000M.
Call to cisco from Nortel extension. Works great! NUMBER + NAME.
Call to Nortel from Cisco extension. Work Great! NUMBER + NAME.

Call from outside to DID routing to CISCO through DSC. (XXX)XXX-734X. Works Great! NUMBER + NAME!! WOW!

Call from Cisco through Nortel to Outside Cell (XXX)XXX-XXXX. No Name (Which is fine, don't care) NUMBER shows just (XXX) area code.


Trace from DCH. "-" Placed by me for easier readability.


DCH 26 UIPE_IMSG CC_SETUP_IND REF 00000600 CH 26 23 TOD 10:58:35 CK 05DE9344
CALLED #:91-XXX-XXX-4233 NUM PLAN: E164 TON: NATL
CALLING #:90X-XXX-7345 NUM PLAN: UNKNOWN TON: NATL

DCH 5 UIPE_OMSG CC_SETUP_REQ REF 0000327D CH 1 17 TOD 10:58:35 CK 05DE934D
CALLING #:90X-XXX-7345 NUM PLAN: UNKNOWN TON: NATL
CALLED #:1-XXX-XXX-4233 NUM PLAN: E164 TON: NATL

The DCH 26 shows the proper CLID coming from the CISCO. And it shows great to the DCH 5 going to the CO. But the display on the Cell/Work # shows just the area code (90X).

Is this something that the Nortel is doing? or could there be a CO issue?

Also,
I can change a set to any CLID that I want, through the CLID in NET_DATA in LD 15.
Is there a way to change the CLID going to the CO on a TIE trunk?

Thanks,

es

 

[tnphoneman]

CLID is on the CDP entry.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[esoare]

Thanks for the reply!
Here is what I got.

ld 87
REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC 734
DSC 734
FLEN 0
DSP DN
RLI 26
NPA xxx (Area Code)
NXX xxx (NXX for this DID group)

When calling from the cisco to the outside world, it still shows just the Area Code.

Any other ideas?

es

 

[tnphoneman]

CPUB in RDB set to yes?

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[esoare]

Not shure what CPUB is, I have attached the RDB.
Got me searching the book. ICNP,ICNT and OCNP,OCNT looks like that would change the type, but couldn't see it in the RDB.

stumpped.
es

TYPE RDB
CUST 00
ROUT 26
DES CISCO
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
IDEF NET
RCLS INT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC ISGF
SBN NO
PNI 00000
NCNA NO
NCRD NO
CHTY BCH
CTYP CDP
INAC NO
ISAR NO
CPFXS YES
DAPC NO
INTC NO
DSEL VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD xxxx
TCPP NO
TARG
CLEN 26
BILN NO
OABS
INST
IDC YES
DCNO 2
NDNO 2 *
DEXT NO
DNAM NO
ANTK
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
IENB 5
TFD 0
VSS 0
VGD 6
DRNG NO
CDR YES
INC YES
LAST YES
QREC YES
OAL NO
CDRX NO
VRAT NO
MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

 

[esoare]

What a pain, banging head on coputer screen (it's not one of the flat wimpies, it's a full blown 15" CRT) .

Thanks,
Es

p.s. just letting out some frustration. 5-6 hours on this, doesn't feel very good.

 

[wcmyers3]

how is your DMI table set up? is it changing the type of call?

 

[esoare]

Yes the DMI is changing the call to NPA.


NPA 1503

NPA 1503
RLI 2
SDRR NONE
ITEI NONE


>ld 86
ESN000

MEM AVAIL: (U/P): 19746113 USED U P: 4941022 322013 TOT: 25009148
DISK SPACE NEEDED: 530 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
CUST 0
FEAT net

ESN009
FEAT rlb
RLI 2

RLI 2
ENTR 0
LTER NO
ROUT 6
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 6
DMI 8
FCI 0
FSNI 0
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ NO



FEAT dgt
DMI 8


DMI 8
DEL 0
ISPN NO
CTYP NPA

 

[esoare]

shameless bump.
just in case someone was fishing on Friday, or in the wilderness.

 

[esoare]

OK, So it is fixed.

The First DCH Messages are what we were getting when it wasn't working. Notice the "UNKNOWN". Now, with this configuration I was getting the area code on the display of the called set (out side of the switch). I could not find in the Nortel, what to change, to display the rest of the info, I/e to add the nxx and dsc, or attache a CLID to the call. Remember , Tie trunk from Cisco to Nortel, Nortel to CO. Anyways see below for fix.

DCH 26 UIPE_IMSG CC_SETUP_IND  REF 00000400 CH 26 23 TOD  10:39:25 CK 05BB8E53

CALLED  #:91503xxxxxxx NUM PLAN: E164  TON: NATL

CALLING #:xxxxxxx7345 NUM PLAN: UNKNOWN   TON: NATL

 

DCH 5 UIPE_OMSG CC_SETUP_REQ  REF 0000325B CH 1 14 TOD  10:39:25 CK 05BB8E5B

CALLING #:xxxxxxx7345 NUM PLAN: UNKNOWN   TON: NATL

CALLED  #:1503xxxxxxx NUM PLAN: E164  TON: NATL

********************************

So. I thought, well we are seeing "UNKNOWN" on the NUM PLAN. So The Cisco must be sending that. Contacted the Cisco Call manager Tech, and with his support was able to change the info to the following.

I had to use the following settings:

Called party IE number type     =       Cisco CallManager
Calling party IE number type    =       National
Called Numbering Plan   =               Cisco CallManager
Calling Numbering Plan  =               ISDN

now we get the "E164" NUM PLAN" and that passes the CLID just fine to the outside world through the Nortel system. BTW Succession 4.5W 1000M

.
DCH 26 UIPE_IMSG CC_SETUP_IND  REF 00000880 CH 26 23 TOD   8:13:36 CK 138FBB36
CALLED  #:91503xxxxxxx NUM PLAN: E164  TON: NATL
CALLING #:907xxxxxxx NUM PLAN: E164  TON: NATL

DCH 5 UIPE_OMSG CC_SETUP_REQ  REF 00003863 CH 1 21 TOD   8:13:36 CK 138FBB3E
CALLING #:907xxxxxxx NUM PLAN: E164  TON: NATL
CALLED  #:1503xxxxxxx NUM PLAN: E164  TON: NATL

******

Hope that helps someone,

Thanks to those who tried helping, and sorry for not posting my question to well. English is my second language.

ES