easthope31
Technical User
Hi All
I have a Watchguard III/700 and I am trying to configure NAT to my internal server from Public I.P address in my range. I have configure the following so far.
Please note Real base is internal Exchange Server and NAT Base is free IP in Public Range
NAT-ADVANCED NAT-121 NAT SETUP
.Ticked Enable 1-to-1 NAT
Interface External, NAT BASE 212.X.X.91,Real Base 192.X.X.6
Number of NATS to Host: 1
Dynamic NAT Exceptions
From Host IP address 192.X.X.6
to External
Policy Rule
Incoming & Allow
FROM
Any
TO
212.X.X.91
OUTGOING
FROM
any
TO
any
Properties
Port-443-Protocol-tcp-client port-client
Any help would be thankfull
P.S got a feeling it is the router
I have a Watchguard III/700 and I am trying to configure NAT to my internal server from Public I.P address in my range. I have configure the following so far.
Please note Real base is internal Exchange Server and NAT Base is free IP in Public Range
NAT-ADVANCED NAT-121 NAT SETUP
.Ticked Enable 1-to-1 NAT
Interface External, NAT BASE 212.X.X.91,Real Base 192.X.X.6
Number of NATS to Host: 1
Dynamic NAT Exceptions
From Host IP address 192.X.X.6
to External
Policy Rule
Incoming & Allow
FROM
Any
TO
212.X.X.91
OUTGOING
FROM
any
TO
any
Properties
Port-443-Protocol-tcp-client port-client
Any help would be thankfull
P.S got a feeling it is the router