I have a customer with an 0x32 that changed out PRI providers. The new pri requires a number for outbound caller ID. After stumbling my way around I found OLI for station programming and when I put the number for the OLI I can dial out. Is ther a way that i can change my outbound CLID for all stations to the new BTN. I am not a Norstar tech.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
0x32 PRI clid help
- Thread starter jhess65
- Start date
curlycord
Programmer
What happens when you put your BTN (main phone number) in the OLI?
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Thread starter
- #3
curlycord
Programmer
If that's not what you asked for then I am not sure of what it is you want, sorry.
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
norstarboy125
Vendor
Correct, you just need to change every extensions OLI# to the new BTN.
Jeremy J. Carter
Charm City Communications
Avaya/Nortel
Sales. Service. Installation
Jeremy J. Carter
Charm City Communications
Avaya/Nortel
Sales. Service. Installation
- Status
Similar threads
- Locked
- Question
- Locked
- Question