Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
012 analog card
- Thread starter papagigo1
- Start date
Nope, the 016 TRR card is the only Tip & Ring card for the Metal Magix.
You can use the top 6 ports of an ETR Card for Tip & Ring as well. But I'll bet you don't have any of those.
You can use the top 6 ports of an ETR Card for Tip & Ring as well. But I'll bet you don't have any of those.
- Thread starter
- #3
Merlinman,
At this location I actually do have one ETR CP because of the lighted display on two Partner sets in the dark room.
That's all they could use back then. I want to swap it out with a 412 pack and use a 4424LD in it's place.
Mike
At this location I actually do have one ETR CP because of the lighted display on two Partner sets in the dark room.
That's all they could use back then. I want to swap it out with a 412 pack and use a 4424LD in it's place.
Mike
tdaugirdas
Technical User
You CAN take a newer Legend 012 with Ring Gen module - remove it from it's Legend case and install it in a Magix carrier - however it will not have the front grey cover to easily remove it - once installed. It will, nonetheless, work just fine.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Do you have room for another Module?
That way you could keep the ETR Card and add the 412-TDL.
That way you could keep the ETR Card and add the 412-TDL.
- Thread starter
- #6
However, I doubt that his Client or his Boss or his Fellow workers would allow Tom's suggestion to be implemented.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question