011 block on IPK

[cayres1003]

I am reluctant to put this out there, but I just don't seem to be getting it.
I am looking at the manual trying to figure out if I can block 011 on all trunks on an IPK
I see code restriction, but I am not sure that is what I am wanting. If it is, then it is not sinking in.
I just need a quick fast way to block 011 on all trunks.


Thanks

 

[belevedere]

There is no "easy" way. You need to set up and modify the code restriction tables.
Assign them to extensions in MB 4-07/4-08 (D/N). At default every extension is in class 00, change on to 01 for testing purposes.
In MB 1-1-65, set tables 14 and 15 to allow
In MB 1-1-60, modify table 11, entry 00 from 0 to 011
Test.
If you have a programming manual (

http://www.wedophones.com)you

will see in the back a flow chart that may help.
If it works like you need it, then change the remaining extensions to class 01.