bobbywires
Technical User
I installed a 008 MLX card for the Legend R6.0. When i try to busy it out and then restore it an error comes up saying restore failed board mismatch. Is this board not compatible with my system?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
008 MLX
- Thread starter bobbywires
- Start date
- Status
tdaugirdas
Technical User
You may need to do the board renumber more than once for it to be properly recognized. I assume you added the board at the next open slot. If you replaced a different board with the 008 MLX - you may also need to perform some extention renumbering - and additional programming in group definitions, voicemail, etc.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Tom Daugirdas,
President
STCG, Inc.
stcg.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question