I have configured 9 APs and only have a handful of devices using the wireless network. I have configured AES encryption, EAP-FAST authentication and everything is working great EXCEPT when I try to authenticate to the AP with RADIUS running on it. All of the other 8 APs use the ninth one for...
Nope. No restrictions. I think it may be the IOS on the 3548. It is "3500XL-c3h2s-mz-120-5.3.WC.1.bin"
For some reason the 3548 will only sees one vlan interface up/up and puts the other vlan interfaces in admin down status and with a "no shut" it still shows them admin down. It does however...
From the Distribution 3548:
DISTRIBUTION#sho vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/25, Fa0/26, Fa0/27, Fa0/28...
Here is the scenario. I have 4 separate VOIP labs that I need to keep separated. I need to be able to display phones at 3 locations in the building from 4 different vendor types (Cisco Call Manager, Nortel BCM, AVAYA IP Office, and Siemens HiPath).
Each of these 3locations has a 356024PS-S...
I am setting up 3 switches in 3 locations that each need 6 ports in 4 different vlans excluding the native vlan. I have set up the ports as access ports in the 4 vlans (ie. vlan 100- ports 1-6, vlan 102- port 7-12, etc.) I have set up a gig ports as a dot1q trunk. These 3 switches connect to...
Thanks for the help chipk but I am giving up for now. The GLC-T is capable of 10/100/1000 so I am just uplinking them to 10/100 ports for now. I am starting to think my WS-G5483s are defective. Just tried to link them back to back on 2 3524s and they wouldn't come up.
Thanks and I will...
Here are the show interface for a 3548 with WS-G5483 in G0/1 and a 3560 with GLC-T in int G0/1. I don't have trunking configured yet.
3548#sho int g0/1
GigabitEthernet0/1 is down, line protocol is down
Hardware is Gigabit Ethernet, address is 0008.2190.6831 (bia 0008.2190.6831)
MTU 1500...
Hi,
I am trying to establish connectivity between an older WS-C3548-XL-EN and 2 newer WS-C3560-24PS-S through the 1000base ports. The cables are Cat5e (tried straight thru and Xover). The 3548 takes the older WS-G5483 transceiver and the 3560 takes the newer GLC-T SFP transceiver.
I've...
I know that I can set up an H.323 network with analog phones and a few FX ports but is it possible to set up a H.323 network with Cisco IP phones which need load info, tftp, ip add, Def Gateway info, etc. without having a Call Manager or using SIP?
Is this not the way SRST works? Doesn't SRST...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.